Products

1) Introduction and Features： This is a Smart protection board specially designed for battery packs of.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the...

• For 10S 13S 14S  16S li ion or Lifepo4   Battery Application . • charge and discharge port : same or Different  • Dimension :87*55*10mm •  With High temperature detection function • With full set of protection functions : such as Over-charge and...

1) Application:this smart BMS can work for 12S 13S 14S 15S Lithium ion or Lifepo4 Battery ,client can choose based on your battery chemistry features2) Current : constant current of this version BMS can be made with 20A to 60A in accoridng to the...

Descriptions briefly : This is  smart chargers  which has small size , with high charge efficience,and with  fully  protection against li ion or lifepo4 battery system , and it was designed with shock-resistant. The entire unit adopts LLC resonant soft-switching technology, achieved a maximum...

Descriptions : This high quality alloy type charger has such characteristic as belowing :1.short-circuit protection,charger o/p current automatically when short-circuit.2.overload protection:charger o/p current limited automatically when overload.3.reverse polarity protection:it will shut down when the wire is connected,charge DC fuse or remove the fault.4.2-stages charging...

This is a Smart protection board specially designed for battery packs of.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum continuous discharge current...

This is a Smart protection board specially designed for battery packs of.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum continuous discharge current...

This high quality alloy type charger has such characteristic as belowing  :   1. Application : For 3S~24S Li ion or Lifepo4 Battery  with 3.5A~15A constant Charge  current , client can leave a message with your order for the customized voltage  and current ,voltage selection...

10S 11S 12s 13S 14S 15S 16S 17S  series cell protection for Lithium Battery pack (15*4.2=63V 12*3.65=43.8V Lifepo4 battery pack example ),client can select suitable type based on your battery characteristics Dimension (L*W*T)=102*65*12mm Various protection functions for charging and discharging ( over-charge , over-discharge...

Application :This is The BMS for 3 series 12.6V (11.1) V  Li ion  Battery or 4S 14.6V Lifepo4 Battery Application     with 50A constant  discharge current . Dimension :80*55*20mm   Function :This BMS has such basic functions : over-charge protection ,over-dicharge protection, over-current protection,short circuit protection .Balance...

This is a smart BMS with Bluetooth and PC communication which will be used to protect and monitor your battery status visible from the computer and your android APP phone .which can support   UART , RS485, or   communication ,client can select different communication based...

Features and Characteristics :  Characteristics : This is BMS which was specified for work 16S  or 8S Lifepo4 Battery The productadopts architecture of front-end acquisition  chip + MCU, and some parameters can be flexibly adjusted through the host computeraccording to customer needs.the charge and...

This is a Smart protection board specially designed for battery packs of.It can be applied to 3S or 4S 12V lithium batteries with different chemical properties, such as lithium ion, Li-polymer. BMS modules can allow Max 4 units to be connected in series to...

This is  smart BMS  with UART &RS485 Communication  which can support APP or PC communication ,and it can be used to protect and monitor your battery status visible from the computer and your android APP phone .all protection parameters can be edited conveniently on...

Features and Characteristics :  Characteristics : this is a smart BMS with Bluetooth and PC communication which will be used to protect and monitor your battery status visible from the computer and your android APP phone .which can support  UART  or UART and RS485...

1) Characteristics : this is a smart BMS with Bluetooth and PC communication which will be used to protect and monitor your battery status visible from the computer and your android APP phone .the charge and discharge port is same . 2) this BMS...

Introduction of high-voltage energy storage master-slave BMS systemthis BMS system can Manage the entire battery pack, collect the battery’s total voltage, total current, and ctemperature, diagnose whether the system has abnormal faults, and which was used for battery charge and discharge management and safety...

Description This high quality alloy type charger has such characteristic as belowing  : 1. Application : For 3S~24S Li ion or Lifepo4 Battery charger  with 5A~25A constant Charge  current 2. Support customized charge voltage and current :client can leave a message with your order...

Introduction and Features：  This is a Smart protection board specially designed for battery packs of.It can be applied to lithium batteries with different chemical properties, such as lithium ion, Li-polymer. Lithium iron phosphate, etc. The protection board has strong loading capacity and the maximum...

Briefly introduction : 1)  Application :This is smart BMS with 250A constant charge and discharge current suitable for 7S  to 22S li ion or Lifepo4 Battery system ,BMS can  automatically detect  your battery series in according to different connection methods 2) Communication type :...